|
General
Description
Photoluminescent ropes and tapes, which glow-in-the-dark, are a new type of safety equipment
which increase the level of safety in all types of conditions.
Our glow-in-the-dark ropes are manufactured using a specially
developed method of impregnating and coating the exisiting rope-core
with a unique mixture of flexible resins and luminous materials.
The three dimentional layer structure makes it possible to achieve
an extremely high after glow performance. In addition our ropes
are coated with a thin layer of Teflon-similar material which
gives good protection against dirt, oil and water. A-SPE ropes
are very easy to clean, you can just wipe them with a regular
cloth.
Luminous
Performance
The afterglow performance of our photoluminescent rope and tape
has been tested in accordance to DIN 67510 norm by an independent
laboratory.
Quality |
Brightness
in mcd/m2(after 10 / 60 mins) |
R1 |
186
mcd / 24 mcd |
R2 |
75
mcd / 12 mcd |
Application
Below we have listed a few of the ways in which our rope can be
applied:
-
ship industry
- crowd barrier rope/tape
- boating
- camping and fishing
- safety ropes and many others.
The
range of its application is extensive – for this reason
the user should conduct tests of the material to be used to confirm
that it meets their expectations as to specific conditions of
use.
Availability
Our luminous ropes are available in the following standard sizes:
Ropes |
Tapes |
Diameter
/ Length |
Width
/ Thickness / Length |
5
mm / 50 meters |
2
mm |
12
mm / 50 meters |
50
mm |
20
mm / 50 meters |
50
meters |
As
our technology allows for the application of the luminous layer
on many various surfaces we can produce ropes in all sizes of
almost any type according to our customer’s demand. |
